glassy surface
英 [ˈɡlɑːsi ˈsɜːfɪs]
美 [ˈɡlæsi ˈsɜːrfɪs]
玻璃屋顶
双语例句
- The obtained water soluble cores had high strength, good glassy surface, high water solubility, good stability and low cost.
所制得的水溶芯具有强度高、表面光洁、水溶性好、性能稳定、成本低等优点。 - We skated on the glassy surface of the frozen pond.
我们在池塘光滑的冰上溜冰。 - The results showed that the content of filling was better to be10% and the water soluble core-mould material had high strength, good glassy surface, good water-solubility, and so on.
实验结果表明，在磷酸酯淀粉中加入质量分数10%的刚性填料所制得的水溶性芯模材料，具有强度高、表面光洁、水溶性好等特点。 - Nano-structured system of myoglobin-alumina template-colloidal gold on the glassy carbon electrode surface has been successfully fabricated by assembly technology.
基于自组装技术在玻碳电极表面构筑了肌红蛋白-纳米氧化铝模板-金胶复合组装体，研究了该纳米复合组装体的电化学性质。 - A colored glassy compound ( opaque or partially opaque) that is fused to the surface of metal or glass or pottery for decoration or protection.
一种有色玻璃状化合物（不透明或半透明），融化后涂于金属、玻璃、陶器的外表作为装饰和保护。 - Glucose biosensor has been developed by using bovine serum albumin ( BSA) and glutaraldehyde as a cross linker to immobilize glucose oxidase on the glassy carbon electrode surface modified by benzoquinone in polyvinyl chloride ( PVC) membrane.
用聚氯乙烯将苯醌修饰在玻碳电极的表面，再用牛血清白蛋白和戊二醛将葡萄糖氧化酶固定在电极上，制备成葡萄糖传感器。 - Myoglobin ( Mb) was immobilized on glassy carbon electrode ( GCE) surface by konjac glucomannan ( KGM).
用魔芋多糖（KGM）将肌红蛋白（Mb）固定在玻碳电极（GC）表面，制备了Mb-KGM膜修饰电极。 - By adjusting and controlling the treatment temperature, steam flow rate, treatment time and other process factors, the steam treated ferrous P/ M parts can possess uniform colour and glassy surface with metallic shine, and unique antirust function.
通过调整和控制蒸汽处理温度、蒸汽流量、处理时间等工艺参数，最终可使制品颜色均匀、表面光滑、呈兰黑色金属光泽，具备了优异的防锈功能。 - The result shows that the power density and scanning speed are two important factors to produce glassy surface layers.
试验结果表明，激光功率密度和激光扫描速度是实现材料表面非晶化的重要条件。 - Two groups of SiO 2 thin film coatings without cracks are prepared on the glassy coating of inner surface basic body in the investment casting mold.
在熔模铸造壳型内表面基体玻璃涂层上制备了两类无裂纹SiO2薄膜涂层。 - The water-soluble cores prepared had high strength, good glassy surface, water-soluble, stable property, and low cost.
所制得的水溶芯强度高、表面光洁、水溶性好、性能稳定、成本低。用这种水溶芯铸出的铸件尺寸形状准确，轮廓清晰，具有较高质量的内腔表面。 - The carbon nanotubes were solubilized in aqueous solution of a biopolymer chitosan ( CHIT) and immobilized onto glassy carbon electrode surface. Toluidine blue ( TB) was modifieded onto the glassy carbon electrode surface with glutaric dialdehyde.
将碳纳米管（CNT）分散在壳聚糖（CHIT）溶液中固定到玻碳电极表面，用戊二醛交联甲苯胺蓝（TB）得到复合膜（TB-CNT-CHIT）修饰电极。 - First pretreated glassy carbon electrodes, glassy carbon electrodes were continuous Al2O3 powder with different size polishing up to produce a smooth, shiny surface.
首先对玻碳电极进行前处理，玻碳电极分别连续用不同尺寸的Al2O3粉末抛光，直至产生一个平滑、光亮的表面。 - The primary purpose of this paper is to investigate chemical modification of glassy carbon electrode surface and the electrochemical behavior of antibiotic ofloxacin and neurotransmitter dopamine, and to established new and sensitive electrochemical methods for pharmaceutical analysis.
本论文旨在研究玻璃碳电极表面的化学修饰，研究抗生素氧氟沙星和神经传质多巴胺的电化学行为，建立灵敏的药物电化学分析新方法。 - Based on electrodeposition technology, Ru ( bpy) 32+ was directly modified at the carbon nanotubes ( CNTs) modified glassy carbon electrode ( GCE) surface, and an electrochemical sensor for the detection of tertiary amines was constructed.
基于电沉积技术，将Ru（bpy）32+直接固定在碳纳米管修饰玻碳电极表面，构建了一种用于检测叔胺类物质的电化学传感器。 - Study the birth 、 development and growth of surface micro-cracks, the removal and testing methods about the micro-cracks are proposed. 1 、 the most important factor influencing the working life of the optical components made of glassy material& the surface strength, is confirmed.
从表面微裂纹的产生、扩展及生长方式入手，研究表面微裂纹的去除和工艺检测办法。1、确定了影响玻璃质光学元件工作寿命的重要因素&表面强度。